FIXIT – Multi-Media Repair Compound

Directions

*Wear appropriate disposable gloves [e.g., vinyl or nitrile] when blending parts A and B… [S 37]

1. Wear disposable gloves to measure equal parts of A & B. Always retrieve parts A & B with different tools.
2. Mix & knead together for 2 minutes until thoroughly combined and a uniform color is achieved. Note incomplete mixing will give poor results. Allow mixed product to rest 5 minutes for better handling.
3. FIXIT® is ready to use; working time is 1-3 hours. Shape as desired. Smooth or texture with a wet finger, brush, Q-tip or sculpting tool. Self-hardens (NO BAKING); 24 hour full cure to a rock hard, semi-gloss finish.
4. Clean up: soap & water or Aves® Safety Solvent (very helpful for smoothing, removing finger prints & cleaning up pigment / product residue before set-up). Finish as desired. Paint wet or dry. Outdoor & Marine Quality!

*Wear protective gloves [e.g., nitrile or equivalent] when combining parts A and B. Wear a dust mask and safety glasses when sanding cured product…[P280] *Keep out of reach of children…[P102] *Safe for adults when used as directed. 24 hour full cure required for hard finishing purposes such as sanding, carving, drilling, machining, etc. Keep containers sealed when not in use. Freeze-Thaw-Stable.

WARNING – H317 May cause an allergic skin reaction. H320 Causes eye irritation. CA Proposition 65 DANGER – contains crystalline silica known to be a human carcinogen via respiratory route. Applies only to the cured clay product when sanded or abraded in some manner to create airborne dust.

FIXIT® Conforms to Safety Standard ASTM International D4236